| NTN CRTD5317 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ba:38.894 mm; H:217.488 mm; da:100 mm; R2:30.163 mm; R1:58.737 mm; P180°:55.6 kN; End plug (suffix Y):EPR 15; J min.:295.275 mm; Taconite seal (db shaft position):TER 118; H1:114.3 mm; H2:44.45 mm; RG:3/8 NPT; P120°:50.7 kN; Cap bolt, SAE grade:5; P150°:46.3 kN; Initial grease fill:365.71 g; N1:25.4 mm; Appropriate attachment bolt size G:0.875 in; Housing:SAF 220; Ca:55.804 mm; |
| 829264 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Weight:0.0060 Kg; Radius Rs min:0.300 mm; Cr - Dynamic Load Rating:2.1 kN; Bore Size d:15 mm; Grease Limiting Speed:26000 rpm; Oil Limiting Speed:31000 rpm; Features:Non-Contact Seals; Clearance:C3; Outside Ring Width B:5.000 mm; C0r - Static Load Rating:1.3 kN; Outside Diameter D:24.000 mm; |
| 511746 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Series:27800; Y - ISO Factor3:1.07; e - ISO Factor2:0.56; Cg - Geometry Factor:0.0839; Design Units:Imperial; C - Cup Width:0.6875 in; Da - Cup Frontface Backing Diameter:2.99 in; r - Cup Backface To Clear Radius1:0.06 in; Cup Part Number:27821; D:3.1510 in; Db - Cup Backface Backing Diameter:2.72 in; |
| SKF BFDB350824B/HA1 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10000 lbf; r - Cup Frontface To Clear Radius2:0.03 in; C - Double Cup Width:1.8125 in; d:1.9685 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5760 lbf; Cup Part Number:394YD; Bearing Weight:4.99 lb; e - ISO Factor8:0.4; Y2 - ISO Factor10:2.5; R - Cone Backface To Clear Radius1:0.03 in; Cone Part Number:396; Y1 - ISO Factor9:1.68; |
| NSK 200TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Initial grease fill:136.08 g; Pa:5.65 kN; L:285.75 mm; Cap bolt recommended tightening torque:81.3 N·m; PG:1/8 NPT; A1:79.375 mm; Max. speed for Taconite seal:1250 r/min; Appropriate attachment bolt size G:0.5 in; J min.:219.075 mm; ba:30.163 mm; P90°:32.5 kN; Mass pillow block:12.7 kg; J max.:244.475 mm; Taconite seal:TER 37; Stabilizing ring:2 x SR-15-0; H1:82.55 mm; da:61.913 mm; J1:47.625 mm; |
| FAG 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Y - ISO Factor9:1.68; Cg - Geometry Factor11:0.0448; Cup Part Number:05185-B; Bearing Weight:1 lb; C1 - Dynamic Radial Rating (1 million revolutions)5:6010 lbf; D1 - Flange Outer Diameter:2.0024 in; K - Factor7:1.64; G2 - Heat Generation Factor (Rib-Roller End):5.55; Series:05000; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:-0.01 in; C1 - Cup Flange Width:0.1090 in; da - Cone Frontface Backing Diameter:0.83 in; |
| FAG 532584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cap bolt, SAE grade:8; J1:82.55 mm; R2:36.513 mm; Stabilizing ring:SR-26-0; Housing:SAFS 526; J max.:406.4 mm; h:60.325 mm; Da:230 mm; P150°:118 kN; da:114.3 mm; P180°:151 kN; Cap bolt:3/4-10 UNC; Cap bolt recommended tightening torque:515.2 N·m; Max. speed for PosiTrac Plus seal:1300 r/min; P90°:185 kN; PG:1/4 NPT; A2:203.2 mm; P120°:125 kN; J min.:371.475 mm; H2:60.325 mm; |
| 530852 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | L:6.693 in; Weight:25.50 lb; Threads No. per Inch:8; Taper:1:12; A:7.897 in; d:7.087 in; F:0.178 in; G:1.181 in; Major Dia - B:8.628 in; |