| 232.20.0800.503 Type 21/950.2 Standard 5 Slewing Ring Bearings | radial static load capacity:5213 lb; series:210; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; length through bore:2.02 in; manufacturer catalog number:129745; duty type:Standard Duty; B:6.1300 in; expansion type:Non-Expansion Bearin; mounting type:Four-Bolt Piloted; radial dynamic load capacity:7891 lb; standards met:UL, AFBMA, AGMA, ASM; locking device:Adapter Sleeve; maximum rpm:7500 RPM; |
| 60.35.0680.000.11.1503 Standard 5 Slewing Ring Bearings | precision rating:Not Rated; operating temperature range:Maximum of +250; static load capacity:950 lbf; B:3/8 in; d:3/16 in; D:11/32 in; closure type:Open; series:B; maximum rpm:11000 RPM; standards met:ANSI/ABMA 18.2,; lubrication hole type:No Hole; dynamic load capacity:850 lbf; drawn cup type:Open Ends with Full; cage material:No Cage; |
| 3R8-110N1 Rotek Slewing Ring Bearings | Static Load Rating (kN):21.6; SKU:7015ce/p4adga-skf; Oil Limiting Speed (r/min):26000; Preload:Light; Dynamic Load Rating (kN):26; Fatigue Load Rating (kN):0.915; Clearance:Standard; Availability:In Stock; Cage Type:Plastic; Grease Limiting Speed (r/min):16000; Seals or Shields:Open Type; B:20mm; Weight:0.63 KGS; d:75mm; D:115mm; |
| 61.20.0560.101.21.1503 Standard 5 Slewing Ring Bearings | bearing width:5/64 in; dynamic load capacity:1730 lbf; compatible washer:TRA-916; static load capacity:4840 lbf; d:9/16 in; cage material:Steel; maximum rpm:18000 RPM; D:1 in; thrust bearing type:Roller & Cage As; series:NTA; |
| 61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | mounting type:Two-Bolt Flange; series:UCMFL200MZ2; B:5.5625 in; replacement bearing:UC206-18MZ2; seal type:Contact with Flinger; radial dynamic load capacity:2150 lbf; length through bore:0.866 in; duty type:Standard Duty; bore type:Round; D:4.5938 in; lubrication type:Lubrication Fitting; locking device:Set Screw; housing material:304 Cast Stainless S; radial static load capacity:1080 lbf; d:1.1250 in; |
| 161.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | Category:Sleeve Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:B04264; Profile:Thrust Washer; Material Description:Oil Impregnated Sintered Bronze; Material:SAE841; Inch - Metric:Inch; Long Description:1-1/16" Nominal Bore; 2-3/8" Nominal Outside Diameter; 1/8" Length Thru Bore; Thrust Washer Profile; Oil Impregnated Sintered Bronze; SAE841 Material; 1-1/16" Bore; |
| R11-79N3 Rotek Slewing Ring Bearings | shank thread length:64 mm; standards met:DIN-24 338, ISO-6982; ball width:63 mm; length to ball center:140 mm; head diameter:132 mm; lubrication type:With Lubrication Fit; rod end type:Female Threaded; misalignment angle:4 °; ball material:Steel; head width:52 mm; radial static load capacity:320000 N; race material:Steel; d:63 mm; housing material:Cast Iron; thread direction:Right Hand; shank thread size:M48x2; |
| 231.21.0775.013 Type 21/850.1 Standard 5 Slewing Ring Bearings | bushing material:PTFE w/ Metal B; overall outside diameter:11 mm; inside diameter:9 mm; material specification:Drymet LF; maximum pv value:3.60 N/mm²; overall length:10 mm; max v value:0.65 m/s; operating temperature range:-392 to +536 &d; series:LFB; bushing outside diameter:11 mm; bushing type:Straight Bushing; standards met:RoHS; maximum p value:49 N/mm²; |
| No. | Brand | B | b | d | h | T | D | C | G |
| 60.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R10-125P1B | Rotek | 55mm | - | 120mm | - | - | 260mm | - | - |
| 61.25.0855.575.11.1403 | Standard 5 | 10 mm | - | 12 mm | - | - | 32 mm | - | - |
| 3R16-197N1 | Rotek | - | - | 1.1875 in | - | - | 3.5000 in | - | - |
| 60.45.0805.001.11.1504 | Standard 5 | - | - | 4.0000 in | - | - | 9.2500 in | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | 11 mm | - | 15 mm | - | - | 35 mm | - | - |
| A22-105E2A | Rotek | 10mm | - | 20mm | - | - | 35mm | - | - |
| 62.20.0450.001.21.1503 | Standard 5 | - | - | 1-9/16 in | - | - | 1-13/16 in | - | - |
| 231.20.0700.503 Type 21/850.1 | Standard 5 | - | - | 30 mm | - | - | 92.1 mm | - | - |
| 161.20.0560.891.21.1503 | Standard 5 | - | - | 1.2500 in | - | - | - | - | - |
| 11.20.0971.000.11.1504 | Standard 5 | - | - | 0.3125 in | - | - | - | - | - |
| 231.21.0875.013 Type 21/950.1 | Standard 5 | 75 mm | - | 190 mm | - | - | 290 mm | - | - |
| A16-152E2 | Rotek | - | - | 2.1875 in | - | - | 6.7188 in | - | - |
| 60.20.0414.500.01.1503 | Standard 5 | 4.9219 in | - | 1.0000 in | - | - | 3.8594 in | - | - |
| 3R16-265E1 | Rotek | 17 mm | - | 35 mm | - | - | 45 mm | - | - |
| 61.25.0980.891.21.1503 | Standard 5 | - | - | 0.7500 in | - | - | - | - | - |
| 230.21.0775.013 Type 21/850. | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0560.000.11.1503 | Standard 5 | 65 mm | - | 380 mm | - | - | 520 mm | - | - |
| 230.20.0600.013 Type 21/750. | Standard 5 | 4.4375 in | - | 1.2500 in | - | - | - | - | - |
| A19-150P1 | Rotek | - | - | 0.3750 in | - | - | 0.6245 in | - | - |
| 232.20.0500.503 Type 21/650.2 | Standard 5 | 36mm | - | 40mm | - | - | 68mm | - | - |
| 161.16.0450.891.21.1503 | Standard 5 | 18 mm | - | 25 mm | - | - | 52 mm | - | - |
| 3R6-79P9 | Rotek | 1-15/16 in | - | 1.4375 in | - | - | 3-1/4 in | - | - |
| 92.20.1006.990.11.1503 | Standard 5 | 12.0000 in | - | 2-7/16 in | - | - | 7.2500 in | - | - |
| 11.20.0755.000.11.1504 | Standard 5 | - | - | 1-3/4 in | - | - | 2-1/2 in | - | - |
| A22-129N1 | Rotek | 16mm | - | 45mm | - | - | 75mm | - | - |
| 162.25.1077.891.21.1503 | Standard 5 | - | - | 1-1/4 in | - | - | 1-1/2 in | - | - |
61.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings Video
Slewing ring bearings, turntable bearings | Kaydon Bearings
Kaydon's slewing bearings offer a wide variety of solutions for the most demanding specifications in a variety of applications, including:.
Slewing bearings - Liebherr
Liebherr manufactures top-quality large diameter slewing bearings. Depending on requirements, various dimensions and designs are available.
Large Diameter Bearings Three Row Roller Crane Use ...
Large Diameter Bearings Three Row Roller Crane Use Slewing Ring Bearing ... Our product range consists of single row and double row ball or roller bearings that ...
Large-diameter slewing ring - DirectIndustry
The slewing ring has to be adopted when, in a machinery or in mechanical plant, a structural part must rotate opposed to another part, along a fixed axis, ...
Slewing Rings | SlewPro
Slewing ring bearings are designed for large load-bearing capability and can manage a full range of heavy-duty mechanical equipment. These devices have the ...
Slewing Ring Bearings
Slewing ring bearings are often relied upon to support loads in very large, heavy-duty equipment. Their exceptional combination of heavy load support and ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...