| 61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | mounting type:Two-Bolt Flange; series:UCMFL200MZ2; B:5.5625 in; replacement bearing:UC206-18MZ2; seal type:Contact with Flinger; radial dynamic load capacity:2150 lbf; length through bore:0.866 in; duty type:Standard Duty; bore type:Round; D:4.5938 in; lubrication type:Lubrication Fitting; locking device:Set Screw; housing material:304 Cast Stainless S; radial static load capacity:1080 lbf; d:1.1250 in; |
| 3R16-245N1 Rotek Slewing Ring Bearings | precision rating:ABEC3, P6; closure type:Open; finish/coating:Uncoated; D:170 mm; cage material:Machined Brass Cage; maximum rpm:4000 rpm; internal clearance:C0; d:95 mm; radial dynamic load capacity:111000 N; maximum temperature:120 °C; B:1.2598 in; snap ring included:Without Snap Ring; fillet radius:2.1 mm; bore type:Round; row type & fill slot:Single-Row Non-Fill; series:7200; contact angle:40 °; |
| 250.14.0300.013 Type 13/4 Standard 5 Slewing Ring Bearings | manufacturer product page:Click here; material:Steel; overall nut width:34 mm; face diameter:290 mm; manufacturer upc number:4012801218412; thread size:Tr260x4 mm; series:HM30; lock washer or locking device part number:MS3048; D:310 mm; |
| 62.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | size code:B428, B528; bearing bore diameter:40 mm, 1-3/4 in; |
| 61.20.0710.101.21.1503 Standard 5 Slewing Ring Bearings | shank thread size:5/16-24 in; head diameter:0.875 in; grade:Precision; lubrication:Unlubricated; shank thread length:1.250 in; d:0.2500 in; ball width:0.375 in; misalignment angle:13 °; series:HM; manufacturer catalog number:HMR4-5Z; housing material:Alloy Steel Heat Tre; race material:Steel; rod end type:Male Threaded; ball material:52100 Bearing Steel; thread direction:Right Hand; head width:0.281 in; |
| 62.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | radial static load capacity:12.9 kN; cage material:Cotton Fabric Reinfo; manufacturer upc number:7316570972337; precision rating:P4; maximum rpm (oil):37000 rpm; duplex type:Duplex Universal; B:18 mm; contact angle:25 °; maximum rpm (grease):24000 rpm; fillet radius:1.1 mm; operating temperature range:300 °F; radial dynamic load capacity:17.2 kN; D:95 mm; manufacturer product page:Click here; |
| 62.20.0560.000.11.1503 Standard 5 Slewing Ring Bearings | B:65 mm; d:380 mm; series:619; dynamic load capacity:365 kN; bore type:Round; outer ring width:65 mm; internal clearance:C0; D:520 mm; static load capacity:585 kN; cage material:Brass; closure type:Open; operating temperature range:Maximum of +200; finish/coating:Uncoated; precision rating:Not Rated; fillet radius:3 mm; |
| 162.20.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Seals or Shields:Open Type; B:18mm; Static Load Rating (kN):40.4; Cage Type:Plastic; SKU:2mm208wicrsul-timken; Dynamic Load Rating (kN):23.8; d:40mm; D:80mm; Weight:0.35 KGS; Availability:In Stock; Speed Rating (r/min):19300; Clearance:Standard; |
| No. | Brand | B | b | d | h | T | D | C | G |
| 61.20.0544.500.01.1503 | Standard 5 | - | - | 3/16 in | - | - | 5/16 in | - | - |
| 62.25.0886.109.21.1504 | Standard 5 | 5/64 in | - | 9/16 in | - | - | 1 in | - | - |
| 60.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | 6.5650 in | - | - |
| 62.25.0886.801.21.1504 | Standard 5 | - | - | - | - | - | 4.7343 in | - | - |
| 162.16.0560.890.11.1503 | Standard 5 | - | - | 0.5000 in | - | - | 1.8504 in | - | - |
| 62.25.1055.500.11.1503 | Standard 5 | - | - | - | - | - | 4.4000 in | - | - |
| 60.25.0555.000.11.1504 | Standard 5 | 25mm | - | 55mm | - | - | 100mm | - | - |
| R11-75E3 | Rotek | 1 in | - | 1-3/8 in | - | - | 1-3/4 in | - | - |
| 3R10-111N2F | Rotek | 12mm | - | 17mm | - | - | 40mm | - | - |
| 231.20.0600.503 Type 21/750.1 | Standard 5 | 2-7/8 in | - | 1.5000 in | - | - | 5-1/4 to 6-1&#x | - | - |
| 60.22.0575.502.11.1503 | Standard 5 | - | - | 7/8 in | - | - | 1-3/8 in | - | - |
| 61.20.0944.575.01.1403 | Standard 5 | 23 mm | - | 65 mm | - | - | 120 mm | - | - |
| 230.20.0700.503 Type 21/850. | Standard 5 | 1.41 in | - | 1.1875 in | - | - | 4-1/4 to 5 in | - | - |
| 61.25.0980.890.11.1503 | Standard 5 | 140 mm | - | 170 mm | - | - | 360 mm | 140 mm | - |
| 60.22.0370.301.11.1504 | Standard 5 | 28 mm | - | 120 mm | - | - | 180 mm | - | - |
| 62.20.0400.000.11.1503 | Standard 5 | 4.5625 in | - | 1.9375 in | - | - | 2.7500 in | - | - |
| 91.20.1006.990.11.1503 | Standard 5 | - | - | 10.2500 in | - | - | 15.7500 in | - | - |
| 62.25.1077.891.21.1503 | Standard 5 | 34mm | - | 100mm | - | - | 180mm | - | - |
| 161.16.0630.891.21.1503 | Standard 5 | 1.7500 in | - | 3.0000 in | - | - | 3.7500 in | - | - |
| 62.20.0644.500.01.1503 | Standard 5 | 27-3/4 in | - | 8 in | - | - | 25-5/8 to 28-7& | - | - |
| 62.20.0710.000.11.1503 | Standard 5 | 5.5625 in | - | 1.2500 in | - | - | 4.5938 in | - | - |
3R16-265E1 Rotek Slewing Ring Bearings Video
Slewing Rings | SlewPro
Slewing ring bearings are designed for large load-bearing capability and can manage a full range of heavy-duty mechanical equipment. These devices have the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing bearings - Liebherr
Liebherr manufactures top-quality large diameter slewing bearings. Depending on requirements, various dimensions and designs are available.
Slewing Ring Bearings
Slewing ring bearings are often relied upon to support loads in very large, heavy-duty equipment. Their exceptional combination of heavy load support and ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
Kaydon's slewing bearings offer a wide variety of solutions for the most demanding specifications in a variety of applications, including:.
Large Diameter Bearings Three Row Roller Crane Use ...
Large Diameter Bearings Three Row Roller Crane Use Slewing Ring Bearing ... Our product range consists of single row and double row ball or roller bearings that ...
Large-diameter slewing ring - DirectIndustry
The slewing ring has to be adopted when, in a machinery or in mechanical plant, a structural part must rotate opposed to another part, along a fixed axis, ...